Krudico Logo
   
Water Treatment Professionals
Krudico Main Window Top

KRUDICO’S 2” ALTERNATING SOFTENER SYSTEMS

 

KRUDICO’S 2” TWIN
ALTERNATING SOFTENER SYSTEMS

Twin Alternating Model
Capacity (grains)
E
Service
flow rate
(gpm)
Peak
flow rate
(gpm )
Volume
(cu. ft.)
each tank
Tank Size
( inches)
Salt Per Regeneration
Brine
tank (salt
capacity)
C-FL-135-2-D-TW 135,000            
C-FL-220-2-D-TW 220,000            
C-FL-300-2-D-TW 300,000            
C-FL-510-2-D-TW 510,000            
 

KRUDICO’S 2” TWIN ALTERNATING
SOFTENER SYSTEMS

Twin Alternating Model
Capacity (grains)
E
Service
flow rate
(gpm)
Peak
flow rate
(gpm )
Volume
(cu. ft.)
each tank
Tank Size
( inches)
Salt Per Regeneration
Brine
tank (salt
capacity)
C-FL-135-2-D-TW 135,000            
C-FL-220-2-D-TW 220,000            
C-FL-300-2-D-TW 300,000            
C-FL-510-2-D-TW 510,000            
 

Krudico’s alternating tank system ensures continuous soft water for commercial requirements. The Twin and Tri-Plex alternating softener systems provides 24 hours of uninterrupted conditioned water precisely and economically.

Solve your water problems with the 2”Alternating Softener System Only an alternating system such as KRUDICO’S Commercial Alternating models can ensure continuous soft water twenty-four hours a day-everyday.  Salt and regeneration water are used only in direct proportion to the water that has been conditioned, giving minimum operation costs. Saves on soap, keeps fixtures and tableware shining and spotless, prevents scale build-up which can cause clogging in pipes.

Krudico’s Twin Alternating Softener Systems consist of two resin tanks one in operation and the other in standby.  After testing the water supply for its hardness content, your plumber or a Krudico tech will calculate the amount of raw water that may be run through each tank before regeneration is required. During operation, when one tank reaches this amount, the control valve switches automatically from this tank to the other tank. The first tank will go into regeneration and upon completion remain in standby until the second tank reaches the pre-set amount. This alteration of tanks may be made up to sixteen times in a twenty-four hour period.

Salt and regeneration water are used only in direct proportion to the softened water consumed.

 

ALTERNATE TWIN ADVANTAGES

bullet
Delivers continuous soft water.
 
 
 
bullet
Flow rates among the industries highest.
bullet
1" Control valve will soften water up to a 24 gpm flow rate while the ¾" meter will provide up to 21 gpm flow rate.
bullet
Five cycle system that can remove as much if not more Iron/rust than other water softeners.
bullet
Backwash, brine draw, rinse and brine refill are accomplished with softened water to provide cleaner and long lasting resin bed.
 

Krudico’s Tri-Plex  Alternating Softener Systems consist of three resin tanks one in operation and the other in standby.  After testing the water supply for its hardness content, your plumber or a Krudico tech will calculate the amount of raw water that may be run through each tank before regeneration is required. During operation, when one tank reaches this amount, the control valve switches automatically from this tank to the other tank. The first tank will go into regeneration and upon completion remain in standby until the second tank reaches the pre-set amount. This alteration of tanks may be made up to sixteen times in a twenty-four hour period.

Salt and regeneration water are used only in direct proportion to the softened water consumed.

 

ALTERNATE TWIN ADVANTAGES

bullet
Delivers continuous soft water.
 
 
 
bullet
Flow rates among the industries highest.
bullet
1" Control valve will soften water up to a 24 gpm flow rate while the ¾" meter will provide up to 21 gpm flow rate.
bullet
Five cycle system that can remove as much if not more Iron/rust than other water softeners.
bullet
Backwash, brine draw, rinse and brine refill are accomplished with softened water to provide cleaner and long lasting resin bed.
 

FEATURES OF THE KRUDICO C-FL-2-C-TW AND C-FL-2-D-TH ALTERNATING SOFTENER SYSTEMS
bullet
Fleck 2900 2" Control Valve
  • 2” inlet/outlet
  • Two times tested, hydraulically-balanced pistons to independently pilot service flow and regeneration
  • Down-flow brining
  • Demand Regeneration
  • Calendar Override
  • Lead Free Brass Valve Body
  • High Efficiency Regeneration Sequence
  • Automatic Capacity Calculations
  • Water and Salt Saving
  • Reset Meter

Fleck 2900
Specifications
bullet
Superior Fiberglass Mineral Tank
bullet
High-quality Nitrate Selective Resin
bullet Gravel Underbedding
bullet
Hub and Laterals to match tank
bullet
Polypropylene Brine Tank
bullet
bullet
Great Service
   
   
 
 
bullet
Optional Addition to the Brine Tank include:
18”/ 24" Plastic Grid Plate
Part #G-18 Optional
Part #G-24 Optional
Use the 18” or 24" Plastic Grid Plate for larger tanks using higher concentrated straight brine.
Plastic Grid Plate
 
1000 Capacity Brine Tank
Standard with the following models:
 
bullet
C-FL-135-2-D-TW
bullet

C-FL-135-2-D-TH

700 and 1000 Capacity Brine Tank
Krudico, Inc. is a "Pentair Residential Filtration" distributor, if you don't see the product you are looking for, please call customer service at 1-800-211-1369, email us at krudico@iowatelecom.net or fill out the request form and we can help you in finding just what you are looking for.
Krudico Accepted Credit Cards
Krudico Main Window Bottom
Krudico Logo