The Krudico 2" models have a separate control valve mounted on each tank. These systems can be installed with two or more tanks in parallel, dependent on the flow rates required and the softening needs. There is one common 2" or 3" reset meter on the effluent or outlet line of the total system that measures the water flow. When a preset amount of water has passed through, the meter signals for one tank to go into regeneration. After regeneration, this tank will stay on standby until the reset meter calls for another tank to go into regeneration. At this time, the standby tank will come back on line and allow the second tank to go into regeneration/standby. This sequence is continuous in either two tank or multiple tank installations.
If the meter calls for a second tank to regenerate before the first tank has finished its cycle, the meter will hold off the signal until the first tank is ready to come back on line. This is to insure proper flow rates are available at all times.
All of the control valves are equipped with a "no raw water" bypass to prevent untreated water from entering the system during the regeneration cycles.

---

Krudico, Inc. has provided softening and filtration systems for over forty-two years for the use in commercial and residential areas across the country and abroad. Krudico, Inc. has gained experience by installing numerous other liquid processing systems including nitrate removal, filtration, reverse osmosis, and ion exchange. Projects Krudico, Inc. normally provide typically entail strict adherence to detailed specifications, codes and standards. Accordingly, Krudico, Inc. is the ideal candidate to provide smooth, timely and trouble-free procurement.